PRODUCTS  

RZS-1000 blown fuse indicator (finger fuse)

Product description: RZS-1000 fuse indicator, suitable for AC 50HZ, rated voltage 1000V and below lines, used in L-type busbar fuses and other products.Finger melting is an external fuse indicator, directly connected to the fuse, when the fuse is blown, the finger melting at the same time to promote the micro switch, the contact is closed, and the electrical signal is sent.The fuse indicator is mainly composed of micro switch, finger core, bracket, copper clip and connecting plate. The dimensions are shown in Figure 1.Fig.1 Fuse indicator dimensions drawing Service installation  During installation, adjust the connecting plate on the finger melting bracket to the same height as the cover plates at both ends of the fuse, loosen the screws above and below the corner of the fuse cover, insert the connecting plate on the finger melting bracket, and tighten the screws. See Figure 2 for the installation and wiring diagram.Fig.2 Fuse indicator installation wiring diagram
Model: RZS
Type: low fuse indicator
Applicable: low Voltage
Colour:
Origin:
ZhenLi Nuobo
  • Parameter
  • Specification
  • Service

RZS-1000 fuse indicator, suitable for AC 50HZ, rated voltage 1000V and below lines, used in L-type busbar fuses and other products.

Finger melting is an external fuse indicator, directly connected to the fuse, when the fuse is blown, the finger melting at the same time to promote the micro switch, the contact is closed, and the electrical signal is sent.

The fuse indicator is mainly composed of micro switch, finger core, bracket, copper clip and connecting plate. The dimensions are shown in Figure 1.

RZS-1000 blown fuse indicator (finger fuse)

Fig.1 Fuse indicator dimensions drawing

 

Service installation  

During installation, adjust the connecting plate on the finger melting bracket to the same height as the cover plates at both ends of the fuse, loosen the screws above and below the corner of the fuse cover, insert the connecting plate on the finger melting bracket, and tighten the screws. See Figure 2 for the installation and wiring diagram.

RZS-1000 blown fuse indicator (finger fuse)

Fig.2 Fuse indicator installation wiring diagram

 





Outline Dimensions of Blown Fuse Indicator

RZS-1000熔断指示器

RZS

Hot Products / Hot Products More
2018 - 08 - 30
Type:EV17-□-□VDC/□APerformance coincidence:IEC60269;GB/T31465 ;JASO D622Rated voltage: AC 250V,690V;DC 150V,500V,750VRated current:10A-500ABreaking capacity:AC:100KA; DC:20KAProtective Type:aRInstallation mode:Bolted connectionCharacteristic:Small size, low power consumption, high breaking ability, time constant T Suitable for:Short circuit protection for large, medium and small passenger cars, pa...
Copyright © 2005 - 2013 ShaanXi ZhenLi Electric Power Technology Co.,Ltd.
犀牛云提供企业云服务    
   
Sweep the concern our letter
Address:No.2055,Shanglinyuan 5th Road, High-tech district, Xi'an City Shaanxi Province, China 
Tel: 86 029-86795471
Fax: 86 029-86307131
Zip Code:330520
Share to:
X
等待加载动态数据...

等待加载动态数据...

3

SKYPE 设置

4

阿里旺旺设置

5

TEL:

6

二维码管理

展开